Search results

  1. S

    srbryan N15 Pulsar VZR DP1

    if you are regularly up around 120deg I would probably agree a fully synthetic would do you fine. keep it solid with an oil cooler then a semi would still be ok. everyone will have their preference at the end of the day, i like regular changes with my oil (dumping all of it in a few seconds at...
  2. S

    N15 Track Car

    Excellent Sent from my XT1092 using Tapatalk
  3. S

    My Mera

    Beam is the same, just has discs on the end instead of drums Sent from my XT1092 using Tapatalk
  4. S

    srbryan N15 Pulsar VZR DP1

    I use semi, don't personally see the benefit of a fully synthetic in these engines. Sent from my XT1092 using Tapatalk
  5. S

    srbryan N15 Pulsar VZR DP1

    Ive used 10w-40 in all of my cars, and will continue to do so in the new engine.
  6. S

    My Mera

    prime opportunity to swap to a disc rear beam right there :p
  7. S

    N15 Track Car

    same with micra's have the load sensing prop valves that get all screwy when you lower the car.
  8. S

    N15 Track Car

    Something you can't do with a stock setup anyway Sent from my XT1092 using Tapatalk
  9. S

    srbryan N15 Pulsar VZR DP1

    Quick blast of brake cleaner will clear any threads out Sent from my XT1092 using Tapatalk
  10. S

    N15 Track Car

    pop the steering wheel off and give it a scrub, bit of fairy liquid and a scrubbing brush will bring the suede back up nicely, i used to have the same wheel. Heres the one from the Eunos, all that stanky hand grease and dirt... Before After
  11. S

    srbryan N15 Pulsar VZR DP1

    to be honest they will probably be fine, but theres always that what if.
  12. S

    N15 Track Car

    the one I used when I did mine was a vice mounted one, was real old, really good though.
  13. S

    srbryan N15 Pulsar VZR DP1

    deez
  14. S

    srbryan N15 Pulsar VZR DP1

    all SR20's
  15. S

    srbryan N15 Pulsar VZR DP1

    It's the two on the inside of the cover nearest the gearbox side, the backs of them are exposed to oil Sent from my XT1092 using Tapatalk
  16. S

    srbryan N15 Pulsar VZR DP1

    Theres 2 bolts in that baffle plate that need loctite Sent from my XT1092 using Tapatalk
  17. S

    srbryan N15 Pulsar VZR DP1

    Get the edge of a wall paper scraper and just tap it through gently Sent from my XT1092 using Tapatalk
  18. S

    N15 Track Car

    Should paint the edges of the plastic, similar to the stock windows Sent from my XT1092 using Tapatalk
  19. S

    srbryan N15 Pulsar VZR DP1

    You will want to paint those hinges, or plaster them in the stone chip/underseal. Sent from my XT1092 using Tapatalk
  20. S

    N15 SR20DE sound

    Can't hear anything in that video, but cameras rarely pick up everything. Sent from my XT1092 using Tapatalk
Back
Top Bottom