Search results

'Tech got a wash, clay and wax. STANCE (Yes its a phone camera)

Oh shut up. Who actually cares other than you?

Spacers : Before Stance : Off comes wheel : Off comes the brakes : Off comes the cap : Split Pin removed, Hub nut removed, washer removed and wheel bearing removed : Ze Spacers : 25mm Spacers : Old Studs vs New studs Old studs knocked out...

?

Chrome Lip?

Lip a similar colour to an N1 cover and a bit of low. :)

Blue open mouth Black 2 slat Yep, im bored.

So Grinder was introduced to Wishbone mount tonight, Got on well i would say. Although... That took so much effort. First grinding the end of the nut off which still wouldnt come out, to then grinding the whole wishbone off, still nothing. So jamming the grinder in the mount soon...

Took delivery of a new wishbone yesterday and started to fit it tonight. ARB droplink grinded off (gonna be ditching the ARB anyway) Back two bolts and bracket holding the bush to chassis removed and stored (no pic) And big massive bolt holding it to the the car....snapped. Great...

First off we took the engine back out the Micra to fit the 2 missing flywheel bolts, fit the clutch, make more modification to the crossbrace so that it bolts in perfectly to the Micra chassis. So engine out onto floor. Gearbox from the 2.0 was removed and so was the gearbox from the...

Update : So tonight was mainly spent on De-rusting the Turtle. Both Rear innner and outer arches need attention aswell as one of the chassis legs and under one of the wing mirrors. So i set to work with the grinder and flap wheel on removing all the rust. I started on one of the rear...

Think Ross is sleeping so he can add things tomorrow, but. On tuesday we made a start on sorting out the wiring on the turtle and splicing the rear of the Micra loom (rear lights, fuel pump) into the Almera loom up front ( clocks, indicators, lights etc....) We started off with this ...