Search results

After my intake hose splitting, I decided to try make my own pipe using a old 3" exhaust pipe, I ordered 14mm and 16mm pipe for my breather and silicone hose connectors. I cut the pipe and connectors to get a rough idea during mock up. drilled the holes for the breather pipes Double...

got bumper and splitter sprayed and left cure for a few days. Re-assembled today with the fine weather, pretty happy considering it's not a professional job. Wet sanded and polished

Wanted to re-paint my front bumper again as i wasn't happy with the finish it had and the shade was slightly off since the last respray. While sanding it i was going to respray the splitter aswel as it had a few cracks in it, when i got a idea to try make a old splitter i had off a 200sx fit it...

Been a while since my last update. Got the car "finished" taxed and tested it. Flew through the test and just been driving and enjoying it, i've put about 1000km in the last month and i'm looking forward to the summer and just cruising around the place and hopefully getting in a track day...

Seating position is ok, it's a bit lower than oem seat adjusted to the bottom. I'd like it abit lower so might modify the frame if it bothers me.

I'm using a rotary polisher and meguiars 105 and 205 polishes.

Started polishing the car this evening. Started with the B Pillars as they were very faded. After A 50/50 of the bonnet And quarter panel before After

Fitted my Bride rails and Dc5 Recaros And started prepping the spoiler before paint Then pulled the car out for a wash before I start machine polishing Car needs to be lowered a touch in the front, and i'm not too sure if i will put the skirts back on or not?

So a bit of an update with the running issue i have been having with the car, was lookin at the car with a mate tonight and started messing with it and checking wiring and spotted that when the car was idling the light behind the odometer/speedo would stay on but when the car started moving it...

Got the head down and got alot of the jobs done but didn't get many pics along the way. Got the car back on the ground on saturday and pulled it out for a bit of a wash as there was plenty of dust and cobwebs over it. I plan to machine polish it over the next few days and get the last few...

Does it need to be supported or will it just hang there?

I'm starting to think that i don't want to drive the car. Bought 2 new wishbones and 2 new arb bushings for €40 on black friday so decided to drop the subframe and paint tht and tidy underneath the engine that way it will look perfect from front to back. What a pain in the arse it was...

Thanks, I'll give them a try

I got replacement bolsters before but don't know if they do replacement fabric/patches for places that are worn through?

Made another small burst this evening for an hour. Bled the brakes again and there is a serious pedal so happy about that will hopefully be good when running. Stripped, cleaned and installed rear coilovers. Old vs New Then had to go out and meet a lad that bought my Rota sub-zeros and...

Short update tonight, got loads done but not many pics unfortunately. Tank is up and bolted in place, Axle up and bolted in as it says to do in the manual, handbrake cables back on, heatshields on and brakes on and bled. Then double checked my marks and drilled the holes for the...

Thanks man, It was a pain in the hole at times but worth it all in the finish i hope.

No doesn't cover them atal. I'm using grommets for the time being until the car gets a respray maybe.

Also cleaned up any brackets that were underneath like the one for the exhaust and the tank Then undersealed from front to back including sills behind the sideskirts and inside the sills using a hose. What a messy job. Painted the fuel filler neck and put that back on aswell...

Wirebrushed the whole tank down and washed and degreased it. Then gave it a couple of coats of hammerite silver Also removed the mani so could underseal all the ways as far as the engine bay and so i could swap in the fuji mani. After a few days wirebrushing the underneath of the...