Almeragt´s SR20VE Almera

timing events and duration change depending on the valve lift its measured at. nissan measure their duration at 0.04mm or 0.016''. if you measured at a different lift you may of got some different results. probabaly gunna change anyway once on the dyno. top work.
many thanks for explanation
 
few pictures in the box I made few days ago, before the paint job... Interior and chassis are ready, paint job is ready today - I´m picking up the car /picutres will be later/ this afternoon
v boxe 2 upravene.jpg
v boxe 3 upravene.jpg
v boxe 5 upravene.jpg
v boxe 9 upravene.jpg
v boxe 13 upravene.jpg
v boxe upravene.jpg
v boxe 15 upravene.jpg
 
How much kost the carbon doors and hood ? You self made it? With vacuum ?
no, all the carbon fiber items are made by Carbon Parts, in CZ:
https://www.facebook.com/carbonpartscz
If you want the price, PM me... I have paid for the forms /quite a lot of money for each one/- forms are my own and those who wants some of those CF parts for Almera, will pays just 10% from the form value to me, so you can save a lot of money
 
Last edited:
no, all the carbon fiber items are made by Carbon Parts, in CZ:
https://www.facebook.com/carbonpartscz
If you want the price, PM me... I have paid for the forms /quite a lot of money for each one/- forms are my own and those who wants some of those CF parts for Almera, will pays just 10% from the form value of the form to me, so you can save a lot of money
OK. but Mine is unfortunately sedan 4doors , but the hood is the same ;)
 
Rear windows cut out, new rubber bands will be on the glasses?
I have bought all new rubber seals almost = all the seals on the both front doors, front and rear screen , except of the rear side windows, as there are the seals part of the window and it was very expensive. Anyway, I have bought all the seals from UK and paid over 900 EUR for them, ubelievable :eek:
 
engine, gearbox are in, suspension fitted as well... We also worked on electricity - all the cables which are not needed are out, everything checked, repaired /what was needed to repair/, wrapped and arranged... Saved around 6.5 kgs on the cables only. OEM heating is out, will be replaced by T7design lightweight heater... some pictures:
interier skladanie 2.jpg
interier skladanie 3.jpg
interier skladanie 4.jpg
karoseria 2,21.8.17 .jpg
karoseria 21.8.17.jpg
skladanie motorovy priestor.jpg
 

Sam

Moderator
Staff member
What is the minimum wheel size you can fit with those extended ball joint lower arms?
 
What is the minimum wheel size you can fit with those extended ball joint lower arms?
I´m not limited by the lower arms, but with front brakes. I can fit min. 17 inch wheel size. Optimal for the lower arms is the wheel size from 16-18 inch
 
  • Like
Reactions: Sam
Top Bottom