Aydza's White N15 Pulsar

hey guys thought i would start a thread for my car to show what mods I'm adding to my pulsar. I got this car for Christmas from my dad which cost $700 from his mate in 2011, it had 248,9xxkms on it now has 276,xxx kms
But a first a few weeks ago I pulled of my partially caved in front and rebuilt it and straightened out this is due to the previous owner of the car. Plus there's rust on the door (under duct tape) and boot but have sourced replacements from my local wrecker
100_0014.jpg~original

100_0009.jpg~original

100_0008.jpg~original

front.jpg~original

100_0042.jpg~original

IMG_2675.jpg~original

MODS:
Exterior
SSS/GTI front bumper
B14 Sentra Fog Lights (Were originally N15 S1 Fog Lights)
SR-V Grille
Eye Lids (Removed)
Clear Guard Repeaters OEM (N16s2)
5" Muffler/Cannon
•LED
Number plate lights
Park globes
High rise brake light
•Quad tail light (brake and tail)
•17" CSA Racetek Rims on 205/40 R17 tyres

Interior
•VZ-R center dash
•LED room light
•Rear roof grab handles
•Electric boot release (Incomplete)
•Polished aluminum pedals (Removed)
•SLX/A32 Maxima adjustable wiper stalk

Engine Bay
•GA16DE (VCT) 270,000+ Kms
•5 speed manual
•K&N panel filter (33-2031-2)
•Metallic silver rocker cover
•8.8mm Top Gun racing leads
•NGK Iridium IX spark plugs
Fluids
Engine oil: Penrite everyday 10w-40 fully synthetic
Coolant: Tectaloy Performance 100
Brake Fluid: Dot 5.1
Transmission Fluid: 75w-90

Audio
•Kenwood Headunit (KDC-U7053BT)
3 RCA
50w x 4
Bluetooth
Handsfree Calling
iPod connectivity
Usb
CD
Multicolour display
•Kenwood dual cone 6" speakers front and rear (KFC-E1654)
160w
•Kenwood 12" 1200w sub (KFC-W3013)
•Kenwood 1000w mono amplifier (KAC-8106D)

Handling
•Brakes
AD22VF Caliper Conversion (SSS,GTi,GTiR,VZR)
Bendix GCT Pads
DBA 4000 Series T3 slotted rotors (Club Spec)
Dot 5.1 Brake Fluid
•Suspension
Yellowspeed Coilovers (7KG Front/6KG Rear Spring rate)
Whiteline Adjustable Rear Sway Bar
Whiteline Adjustable Front Strut Brace
Tyres
•205/40 R17 (Unknown Brand)
IMG_7788.jpg~original

IMG_1451.jpg~original

WANTED LIST!
TWM Short Shifter
SR20DE or SR16VE or SR20VE (Manual possibly with LSD gearbox)
17" Rims probably black (Completed)
Yellow Speed (Completed)
Rear disc brakes
AD22VF SSS,gti,gti-r brake upgrade (Completed)
JDM folding mirrors
Clear Indicator Mod
SSS headlights (Completed)
Bulge Indicators (Completed)
Whiteline Front Strut Bar (Completed)
Whiteline Rear sway bar (Completed)
Whiteline lower control arm brace (Not Installed/Owned)
(B14 Sentra) Rear Strut Brace
(B14 Sentra) Fender Brace
SSS leather steering wheel/MOMO Nissan Wheel/Nissan three spoke steering wheel (SSS Steering wheel (Owned)
SSS interior (door trims/seats/electric windows/leather trims)
Spoiler
Slimline weathershields (Completed)
SSS door bump trims colour coded (Removed originals instead)
Chrome P10 door handles
R33s2 skyline indicator stalk (fog light switch)
SLX adjustable intermittent wiper stalk (Completed)
R33 interior door handles
Longer heater cables so i can fit a double din touch screen head unit!!!


I'M CONSIDERING PURCHASING AN N15 S2 SLX TO SWAP ALL MY GOOD GEAR ONTO AND CONTINUE MY PROJECT ON A CLEANER LOW KMS CAR WITH ALL THE FRUIT
 
Last edited:
bought the last pair of eyelids off eBay and they showed up yesterday, i have fitted them. J ust waiting on my Autech grill to show up :D
100_0073.jpg~original
100_0078.jpg~original
 
Last edited:
Another West Australian pulsar! Welcome!

Have you got any plans for it?
Chris

yeah i've got a few plans for it, at the moment is exterior work
Paint (Noble White)
quad tail light mod
tail light tint
clear indicator mod
either 17"/18" rims
sss lights
Autech grill like urs,which is on its way.

but convert lots of things to a SSS mainly for now
my main dream for it is
an SR20VE
and AWD if it's possible for a sedan
and heaps more i haven't gotten time to write it all down




Yours looks mint, it's one of the best pulsar's I've seen!
 
What is it with Aus N15s rusting round the mirror?

I'm not sure its common, saw a few at my local wrecker when getting a new door, all in the same spot and on both sides. it must be moisture, dirt and vibration from the road I would imagine. I got the last good door
100_0053.jpg~original

100_0054.jpg~original
 
Last edited:
sounds like some good plans! i look forward to seeing progress.

what sort of wheels were you thinking for it? i'd suggest going 17" as a maximum. Personally i think 18" is a bit too big for a pulsar

EDIT: I also have had an issue with rust on the passenger side mirror on mine
 
i had a go at taillight tinting today on a spare series 1 taillight i got with my boot, which turned out awesome i can't wait to do the rest on my car
IMG_2664.jpg~original

IMG_2666.jpg~original
IMG_2676.jpg~original
 
Last edited:
sounds like some good plans! i look forward to seeing progress.

what sort of wheels were you thinking for it? i'd suggest going 17" as a maximum. Personally i think 18" is a bit too big for a pulsar

EDIT: I also have had an issue with rust on the passenger side mirror on mine
the rust is in a painful spot it works its way out from under the mirror.

yeah i was thinking 17" rims, what size are your rims on urs?
 
yeah i've got a few plans for it, at the moment is exterior work
Paint (Noble White)
quad tail light mod
tail light tint
clear indicator mod
either 17"/18" rims
sss lights
Autech grill like urs,which is on its way.

but convert lots of things to a SSS mainly for now
my main dream for it is
an SR20VE
and AWD if it's possible for a sedan
and heaps more i haven't gotten time to write it all down




Yours looks mint, it's one of the best pulsar's I've seen!

Cheers mate. :)

Your list sounds awesome.
As far as AWD is concerned, some JDM N15 SR-V's were AWD, so it would be worth getting one of those and swapping some bits over. Not sure how it would run with an SR20VE, but anything's possible. Just depends on how big your wallet is. haha

Like the bro said, 18's on a car that came with 14's from the factory might be pushing it, and you'll probably find that the tyres would need to be super low profile...

All the best with the modding mate. ;)
Chris
 
Cheers mate. :)

Your list sounds awesome.
As far as AWD is concerned, some JDM N15 SR-V's were AWD, so it would be worth getting one of those and swapping some bits over. Not sure how it would run with an SR20VE, but anything's possible. Just depends on how big your wallet is. haha

Like the bro said, 18's on a car that came with 14's from the factory might be pushing it, and you'll probably find that the tyres would need to be super low profile...

All the best with the modding mate. ;)
Chris
Thanks mate ;)
haha i don't have a big wallet at the moment, but i've got plenty of years ahead to gather everything. i think ill go a set of black 17's and lower her down a bit.

i wanna go to a Perth wrecker and go nuts on buying parts!
 
I've got 16" wheels on mine.

The tinted tail lights look pretty cool. Should look good against a white car
thanks, im gonna tint them when i get her resprayed which will hopefully be soon!

those rims on ur profile pic look like a good size. might have to see how 16's will go, coz urs look sweet!
 
Thanks mate ;)
haha i don't have a big wallet at the moment, but i've got plenty of years ahead to gather everything. i think ill go a set of black 17's and lower her down a bit.

i wanna go to a Perth wrecker and go nuts on buying parts!

Sounds like a plan! I was the same when I started modding my car... I was at uni earning hardly anything...

If you find a good wrecker that has a N15 SSS in Perth let me know... :D after you flog all the good bits that is... or before... :p
 
Sounds like a plan! I was the same when I started modding my car... I was at uni earning hardly anything...

If you find a good wrecker that has a N15 SSS in Perth let me know... :D after you flog all the good bits that is... or before... :p
Haha, ill let u know ASAP when i do i'll try leave some good bits for you ;) but being a base model ill need a few.

I had to wait for a while before i got into mine, i was doing TAFE course full time, and then i got a job now ive got monry to burn! :D
 
Haha, ill let u know ASAP when i do i'll try leave some good bits for you ;) but being a base model ill need a few.

I had to wait for a while before i got into mine, i was doing TAFE course full time, and then i got a job now ive got monry to burn! :D
Epic! that's always good! haha

Are you from Perth? Do you know many wreckers up there? I know a few if need a hand.
 
Back
Top Bottom