Mov's Micra

[mov_mera]

Dude, please do me a favour (or a few to be exact)!

1. Put the stock rear plastic (black) bumper back on
2. Fit a much smaller exhaust tailpipe (something stock looking)
3. Buy a set of wheel trims and cable-tie them to the wheels to make it look stock!

THEN YOU WILL HAVE THEE BEST SLEEPER IN THE U.K.

lol the best sleeper in the U.K will be coming out soon!!!!

Micra K10

 

[VVLwezz]

epic man! makes me want to crack on with mine even more now

 

[mov_mera]

Thanks pal

Well i blew the radiator on Friday fixed that on Sunday.
Then i broke the outer cv (joys of boost)

 

[Stu-E]

Do you get the feeling something's against you bud haha seriously though unlucky .... are you still coming Sunday?

phone

 

[mov_mera]

Do you get the feeling something's against you bud haha seriously though unlucky .... are you still coming Sunday?

phone

Yes!! im going to fix the CV tomorrow then i should be ready to come

 

[Green-gti]

Speedo is acting funny sometimes, the speedo/rev/temp/fuel counter goes up and down... which cause the engine speed to drop when the speedo has a mind of its own, only happens for split sec or two as soon i let of throttle its back to normal? it cant be the map cause it only happens on very few occasions and only when the speedo goes crazy does the engine hesitate!

Can it be the maf, speedo or speed sensor? or any other ideas

could be something to do with wiring between speedo and ecu? just thinking, my civic started playing up and it turned out to be that, could be worth a look as it wouldnt cost anything to check, sweet car by the way!

 

[DBull]

That was the exact reason why we used the Almera GTi hubs, so that we could use the CV's as well!

The Micra CV's are junk!

 

[RAJackson]

That was the exact reason why we used the Almera GTi hubs, so that we could use the CV's as well!

The Micra CV's are junk!

Kinda obvious eh... Hubs designed to take 80hp max getting his with near 4 times that... Nissan overengineer, but not to those degrees

 

[stefan n15rkn]

doing a k11 sr20 swap myself u any tips

 

[happyharrysco1]

n15 hubs, cv's and modded driveshafts, a better/bigger radiator would be the first things I would think

 

[mov_mera]

As above, but i used the micra hubs!

or you could drop it of to me and i can do it for a reasonable price

 

[Simcard]

doing a k11 sr20 swap myself u any tips

Only the tip of a rusty hook in your eye for your appalling lack of good English.

 

[Corbalicious]

Would it not be better to use primera GT components, since N15 CVs and driveshafts are so hard to come by?

 

[mov_mera]

Would it not be better to use primera GT components, since N15 CVs and driveshafts are so hard to come by?

If it works, then id think it would be better to do so???

The only reason i think my micra failed was cause i lost all the grease due to a split CV boot, i reckon the micra one can handle around 300ish bhp/torque

 

[CoV]

Where did you get those figures from?

 

[mov_mera]

Where did you get those figures from?

From my imaginary fantasy world ... im running 230bhp atm BUT i reckon it can handle the above quoted power. Doesn't mean that i said it can, it will.

 

[frank]

jim-gr,s CGA+t sheared the shaft @ about 250lbft eh

 

[almera-steve]

Would it not be better to use primera GT components, since N15 CVs and driveshafts are so hard to come by?

If your using the Almera hubs then the primera outer cv is different to Almera

 

[vss irvine]

gtir cv's are £20 each, they are the same as n14 1.6 sunny cv's.

the gtir use the same cv's front and rear.

cant you use fwd sunny hubs aswell?

 

[DBull]

Primera CV's are by far the biggest, but in saying that, I'm at 500 lbft and have never killed a GTi CV joint.

Driveshafts aren't an issue as there are companies in the U.K. that will make them out of Kryptonite if you should require some!