aftermarket steering wheel; turning off airbag light

[green-gti]

Is there any way of doing this? I have read something about resistors. wanting to fit aftermarket wheel to my n15

 

[pel]

Pull the bulb out

 

[rowdy-GTi]

For a phase 2 cover the bulb as its soldered in.

 

[happyharrysco1]

go to maplin and spend 30p on a resistor, part number is 'M2R7' and plug the resistor into the airbag wiring plug, then tape it in place, then if the airbag light flashes do the reset procedure that's in the esm and your done . then come mot time just put the stock wheel back in place so they can see an airbag, but there is no need to wire the airbag on the wheel back up as the airbag light behaves as it should

.....phone.....

 

[happyharrysco1]

go to maplin and spend 30p on a resistor, part number is 'M2R7' and plug the resistor into the airbag wiring plug, then tape it in place, then if the airbag light flashes do the reset procedure that's in the esm and your done . then come mot time just put the stock wheel back in place so they can see an airbag, but there is no need to wire the airbag on the wheel back up as the airbag light behaves as it should

.....phone.....

 

[green-gti]

sweet; cheers for the advice!

 

[lucinovzr]

Thread revival..what is the esm reset procedure for a gti??

 

[Sam]

Search

http://www.almeraownersclub.com/index.php?threads/38884/